Click image to view full size image
Description
Our slip ring designs are made to meet demanding of operation lamp, and sufficiently solve technical problems which avoiding electrical equipment wire winding while 360 degree limitless rotation.
Features
Transfer all kinds of high definition video signals
Tightened design
Convenient to assembly
Maintenance-free
Operating smoothly and reliability
Extremely low electrical noise
Combine signal and power transmission
Precious metal contact makes the lifetime over-long
Options
| Operation speed, current &voltage | Signal type of high definition |
| Connector | Housing material |
| No. of circuits | Position of wire outlet |
| Electrical Parameters | |
| Number of Ring | 10 ring or according to the actual demand |
| Rated Current | 12A/ring,3rings; 2A/ring, 5rings; 2 video rings |
| Rated Voltage | 0~380VAC/240VDC |
| Dielectric Strength | 500VAC@50Hz,60s |
| Insulation Resistance | 500MΩ/500VDC |
| Electrical Noise | ≤0.01Ω |
|
|
|
| Machinery Technology Parameter | |
| Operating Speed | 0~10rpm |
| Working Temperature | -20ºC - +80ºC |
| Working Humidity | ≤75% |
| Contact Material | Precious Metal |
| Structure Material | Engineering Plastics |
| IP Rating | IP 51 |
Outline dimesion unit
Installation Guide
1.Position the slip ring in the desired location and tighten four screws to shaft.
2.Route the wiring and make the necessary connections,fasten the anti-rotation tab.
Attentions
1.Slip ring can not support the weight of equipment which connects with it, roating equipment should be fastened
so that its weight will not fall on the rotor.
2.Slip ring should be used in dry,low dust environment.If used outdoor,shield is necessary.
3.The surface of lead wire should avoid being damaged while equiment rotating,all lead wire can not bear
weight while you put the lead wire in order.
4.No damaging the surface of lead wire while barking its end.
E-mail: